Our advanced adapter design will allow you to connect a standard CO2 regulator (with DIN477 / JIS m22-14 / W21.8-14 / .860" x 1/14 nut - covers UK, Europe and Asia) to a SodaStream Quick-Connect CO2 cylinder. Easy setup, with no chance of leaks.
SodaStream Quick-Connect CO2 cylinders are readily available from a wide range of high-street retailers, including Sainsbury’s, Comet, Argos, Maplin Store, John Lewis, Dunelm Mill, Harvey Nichols, Robert Dyas, some local hardware stores, and also the SodaStream website (who offer direct delivery straight to your door), ensuring a supply of CO2 is always easy to obtain.
Instructions
- Place the collar over the SodaStream cylinder valve ensuring the flanges are closest to the shoulder of the cylinder and the inner-threaded section at the top.
- Ensure the adapter's valve pin is full retracted by turning the knob anti-clockwise.
- Place the main body of the adapter onto the cylinder, ensuring the rupture-disk on the SodaStream valve fits into the recess on the adapter body.
- Tighten the collar to the main body of the adapter until the flanges are held tightly against the underside of the pink neck of the SodaStream valve.
- Attach your regulator to the adapter using an appropriate wrench or spanner.
- Turn the knob of the adapter clockwise to extend the pin inside the adapter to push the cylinder valve open and start the flow of gas.